MODENGY 1008
Anti-friction solid-film coating based on molybdenum disulfide and graphite
It is used in adjusting mechanisms in the car interior (seats, door hinges and locks, safety belts),
for running-in the drive and reducer gearings, in splined joints of the conveyor equipment drive shafts, to stabilize tightening coefficient of the high-strength fasteners
Package sizes:
Additional expendable materials
and equipment
- MODENGY Special Cleaner-Activator is intended to clean, degrease, and activate surfaces
- MODENGY M1-250 Spray gun - to apply MODENGY anti-friction solid-film coatings
Advantages
- Low friction coefficient
- High load-carrying ability
- Wide service temperature range
- Workability in dusty environment
- High adhesion
- It has properties of anti-emergency lubrication
- It prevents stick-slip motion
- Effective protection against fretting-corrosion
- It cures at room temperature
- Resistance to water wash-off, and to weak chemically aggressive media
- It speeds up parts assembly with robots
- Environmental friendly and safe
Specifications
- Colour: grey-black
- Service temperatures range: -70 … +210 °С
- Standard coating consumption: 70 g / m²
- Cure temperature / time: +20 °C / 50 min or +60 °C / 15 min
It is used in the following typical units
Sliding bearings, sliding guideways, gearings, threaded connections, splined joints, keyed connections, the other units with metal/metal friction pairs
← Back to products