Reverse osmosis filter systems are one of the most effective devices to purify drinking water from foreign impurities. They consist of several cartridge with filters and membrane.
Filters of different purification extent are used in these systems where activated carbon, polymer and other materials are used as filler.
Filling the cartridges with the filtering material as a part of mass production is held by using special metering trays.
Production process is automated and goes on at a high rate, however, engineering procedure slows down because of polymer granules for filter filling sticking to the trays surfaces. This occurs as a result of higher humidity.
Sticking causes breaking material metering, need in stopping engineering line to remove the accumulated powder.
To resolve this issue one of the reverse osmosis filter systems producers started to use anti-adhesive coating. Due to this, they have managed to increase productivity of equipment operation, exclude need for unplanned production stops.
This coating forms a steady separating layer on the trays surfaces that separates polymer material from the metal containers. The particles don’t stick to the coating due to its high anti-adhesive properties.
Applying the product is done by spraying method out of
Use of the anti-adhesive coating on the metering trays enables to improve rate and quality of producing filtering elements for the reverse osmosis systems as well as to extend service lifetime of the equipment.
