The Modengy’s laboratory is equipped with required equipment to carry out the integrated tribotechnical tests for lubricoolants according to the most relevant standards.
The tests for the lubricoolants are held for the purpose of verifying and comparing the anti-friction, anti-wearing, and anti-scoring features at the stages of quality control, selection of the technological media the most appropriate for the certain equipment.
The tests according to ASTM G99 standard is the sphere-disk scheme tribotechnical tests. The studies on the given method are traditionally used in the international practice to identify friction and wear parameters.
It is possible to arrange online broadcast of the tribotechnical tests if necessary. The customer can watch the testing process in real time including monitor value changes on the friction machine screen.
The tests according to the Reichert method are used to identify anti-wearing properties of the lubricating materials. They are especially relevant at studying lubricoolants operating under conditions of the higher loads.
By means of these tests, the industrial enterprises can estimate friction coefficient, wear intensity, frictional heating, and other parameters of friction pair elements interactions with a certain lubricoolant, or with no lubricating materials used in a short time.
For advice on holding the tests, please, contact the Modengy company.