MODENGY 1066
Anti-friction solid-film coating based on molybdenum disulfide and graphite
It is used in the thrust bearings of the oil pumps hydraulic protection; in the radial sliding bearings in pumps and valves; in plunger pairs of hydraulic equipment; in D-valves and other valves in the distributing and controlling devices; in calibrators in the polymer production lines; in the ICE parts such as pistons, sliding bearings that are operated under extreme conditions; in the operating elements of the dry compression screw compressors
Package sizes:
MODENGY 1066 in action
Additional expendable materials
and equipment
- MODENGY Special Cleaner-Activator is intended to clean, degrease, and activate surfaces
- MODENGY 1015 Special Solvent is intended to rinse equipment after the coating is applied, and the uncured coating is removed
- MODENGY 1013 Special Solvent to control completeness of coating polymerization
- MODENGY M1-250 Spray gun - to apply MODENGY anti-friction solid-film coatings
Advantages
- Low friction coefficient
- High load-carrying capacity
- Wide service temperature range
- Workability in dusty environment
- High wear resistance at dynamic loads
- Non-toxic after complete cure
- Effective protection against fretting-corrosion
- It has properties of anti-emergency lubrication
- Anti-corrosive properties
- It prevents stick-slip motion
- Long service life (depends on the unit construction – long-term lubrication)
- Resistance to oils and greases
- It speeds up parts assembly with robots
Specifications
- Colour: grey-black
- Service temperature range: -70 … +315 °С
- Corrosion protection: > 300 hours (ISO 9227)
- Standard coating consumption: 70 g / m²
- Cure temperature / time: +220 °C / 35 min
It is used in the following typical units
Sliding bearings, sliding guideways, gears, splined joints, and keyed connections, cylinder-piston group, other units with metal-metal friction pairs
Documents
Video
← Back to products